8 Channal Tuya Smart Wifi Switch 12v dc 10A Home Automation Device Wireless Relay Switch Module APP

【Remote control】Only supported if you have purchased a remote control) (If there is a flash that does not meet the steps during the operation, please turn off the power and try again),

Note: Power off and restart, wait for the indicator light to finish flashing before operating.

Action explanation: self-locking (press once to open, press again to close)

Action explanation: jog (click and turn on and off automatically after about 0.5 seconds),

Action explanation: Press the lock (press and hold it, release it and close it)

Action explanation: only open (this key can only be opened, cannot be closed)

Action explanation: only close (this key can only be closed, not open)

Action explanation: interlock (this function needs to be set on the APP)

Action explanation: Timing (this function needs to be set on the APP)

Action explanation: delay (this function needs to be set on the APP)

(Learning self-locking) Quickly press the “Setting” button 5 times, relay 1 flashes, (click the setting button to change the learning relay number), at this time, long press a key on the remote control to learn a key, you can continue to press all the keys, after the operation, you need to power off and restart;

Interlock setting instructions: (requires Tuya APP setting)

●Input 2 on the top and 2 on the bottom, which means channel 1.2. Interlock

●Input 3 on the top and 3 on the bottom, which means channel 1.2.3 interlock

●Input 10 on the top and 10 on the bottom, which means interlocking channel 1.2.3.4.5.6.7.8.9.10

●Input 4 on the top and 2 on the bottom, which means channel 1.2. Interlock, 3.4. Interlock

●Input 8 at the top and 2 at the bottom, which means 1-2 interlock, 3-4 interlock, 5-6 interlock, 7-8 interlock

●Input 10 at the top and 5 at the bottom, which means channel 1.2.3.4.5 interlock, 6.7.8.9.10. interlock

●Enter 0 above and 0 below, indicating no interlock

【Jog setting】

Tuya APP setting is required, and the jogging time range is 1-999999 milliseconds.

Jog setting instructions:

●Channel number input 1, the current jog time of channel 1 will be displayed below, and the jog time can be changed such as 500 milliseconds.

●Channel number input 2, the current jog time of channel 2 will be displayed below, and the jog time can be changed such as 500 milliseconds.

●Jogging time input 0 means this channel does not jog, set other channels by analogy.

485 bus (only with 485 function)

[Restore factory settings] Press and hold “Settings” for 10 seconds, let go when the indicator light flashes quickly, and it’s done.